How to replace the broken faucet in the bathroom

How to replace the broken faucet in the bathroom?

1. Turn off the inlet valve under the basin and cut off the water.

2. Turn on the faucet and drain any remaining water from the pipe.

3. Use a wrench to remove the end of the water inlet hose connected to the faucet, and then remove the water inlet hose.

4. Use pliers to unscrew the fastening nut of the faucet.

5. Remove the faucet.

6. Install the new faucet in the reverse order of disassembly.

How to choose a suitable bathroom faucet

1. Check the weight

When making a purchase, you should lift the faucet to feel its weight. If you feel it is very light, it is not recommended to buy because manufacturers usually omit the copper material in the faucet to save production costs. Although the appearance may not be visible, the weight of the faucet will vary greatly. After a long time of use, this type of faucet is prone to the risk of bursting pipes.

2. Look at the controller

When making a purchase, it is important to carefully check the quality of the faucet handle. The handle should generally be smooth, shiny, and easy to operate. If the handle lacks luster and is not flexible to use, it is not recommended to purchase. The widely used handle on the market is a composite type, which can help users free up one hand to turn on and off the faucet when using the basin, which is very convenient.

3. Identify the water outlet

When making a purchase, you should carefully observe the water outlet of the faucet. If the faucet is installed at a relatively high position, can the water outlet fill the basin? If it cannot be filled, it is not recommended for everyone to purchase.